Other
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$17.99
Original equipment replacement rear derailleur hangers.
Get back on the road with a quality replacement hanger.
Product details
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications
- Mounting location: Rear drive side
- Attachment: 1-bolt
$19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager Pro Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$59.99
Genuine replacement parts
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Details:
- Replacement cartridge units for Bontrager Line Dropper seat posts
- Be sure to use the correct size cartridge for the respective amount of travel
- Regular maintenance will help maintain performance and extend the lifespan
$8.95
- Compatible with Super Record, Record, and Athena EPS systems
- Required for use with the charger and works with V2 systems
- USA/North America plug - adapters required for other countries
$1.25
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$30.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$14.50
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 2737 Bearing for 240s Predictive Steering Hubs
$16.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 18307 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6803 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss Cartridge Bearing - 1728
$47.70
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control.
- Allows for easy installation on Rock Shox Torque Cap compatible forks
$25.00
Seal kits for DVO suspension forks.
- Fits Onyx DC and SC forks
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$8.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$26.49
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$15.00
Air spring seal kits for Fox suspension repair and rebuild.
$20.00
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$3.00
FSA Mega Exo Small Parts.
$12.00
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen.
- For road use
- Weight: 50g
$13.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$14.00
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M12 bolt, M27 self-extracting cap, and washers
$25.00
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$3.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
Page 1 of 4
Next page