Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shop All

$10.80 - $31.50
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$85.00
Commuting to work or school on black ice just got faster and easier with the Xerxes. 140 studs provide unrivaled control on those morning rides where ice patches threaten your commute. When a layer of snow conceals black ice, the ultra-narrow profile easily slices through the fluff and gets straight to business providing extreme traction in these extreme conditions. Run the Xerxes at minimum pressure for traction performance, and maximum pressure for a quieter and faster ride on clean roads. - 140 Steel Carbide Studs - Fast-rolling center tread - Narrow profile to fit in most 700c frames - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$85.50 - $175.00
Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes
$40.00
This tool is compatible with all outboard bearing cups that our dual-sided Shimano socket doesn't fit, including Campagnolo, SRAM, FSA, and older Shimano. These gems start as a 7075 aluminum billet and get precisely machined. We take the time to put some nice deep finger splines in this tool so you can thread the cup into the frame by hand with those greasy fingers you haven't washed in a while. - Hard anodized and laser-engraved with torque specs. - Use your favorite 3/8" square drive ratchet or torque wrench to tighten it down.
$100.00
The 612 Track Crank is an extremely stiff and strong 144mm BCD track crank. It’s at home as much on the busy avenues of your city as it is on the boards of the velodrome. All-City sweats the details, so the 612 (Minneapolis’ area code) is cold-forged, resulting in a tight grain structure. The upshot is that it’s strong, which means more riding and less worries for you. It utilizes the classic JIS square taper spindle and comes with a color-matched, 46-tooth, 1/8th chainring.  - Recommended Spindle Length: 110mm - Spindle Interface Type: square taper JIS - Bolt Pattern: 5-bolt - BCD: 144mm - Chain Compatibility: 1/2-inch x 1/8-inch - Weight: 726g w/ ring and bolts - Bottom bracket and retaining bolts not included
$21.00
The Flip Flop cage is made like our Sport and priced accordingly. It's a flexible design allowing the owner to mount it left or right without losing the security and good fit that you get with proper lower and upper tabs.
$79.95
The Dave-O cage is perhaps iconic, as before 2001 bottle cages didn't look or work like this. A classic shape with superior performance. Dave-O's are still the benchmark of quality in carbon bottle cages. - Weight: 30 grams
$79.95
Mandible is the top Arundel model; its grip is the strongest of all Arundel cages. It's great in extreme situations. Mandible cages have weathered the Grand Tours, the Spring Classics, Worlds, all of it. Durable and elegant. - Weight: 28 grams
$12.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$19.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$14.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$14.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
- Heat treated allow steel solid links with solid pins - Compatible with SRAM, Shimano, and Box 11 speed drivetrains - Also compatible with Box`s 7 speed downhill specific drivetrain
$21.99
Banjo Brothers' Small Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool and some food (each sold separately). It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.
$26.99
Banjo Brothers' Medium Seat Bag is perfect for carrying gear on any length ride. And if you're going big, it expands to haul even more gear. It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a light. - Weight: 5 oz. - Dimensions: 6.75" L x 4" W x 3" H unexpanded - Capcity: 65-81 cubic inches - Heavy duty 840 denier nylon construction - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents - Web loop for light
$39.99 - $47.99
Banjo Brothers' Frame Pack attaches to your top and down tubes to securely stow gear within arm's reach. It's made from tough nylon with a lined, colored interior. Plus, the four hook-and-loop straps keep it in place and protect your bike's finish, and you've got a full-length zip, key clip, phone pocket, and reflective piping, too.
$64.99
Foul weather is about to lose its sway over your two-wheeled adventures. Banjo Brothers' Waterproof Pannier is tailor-made for wet commutes and trips around town. The rugged nylon exterior fends off wear and tear while the welded-seam liner and roll-top closure keep the contents dry. It attaches easily to most rear racks (sold separately) via a quick-release mount so you can pop it off and bring it with you. And if you're riding in the rain, the reflective accents bring a little extra visibility and peace of mind.
$74.95
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
$74.95
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across
$49.99
Everything you need for an all-day ride, close at hand. The Buddy Handlebar bag mounts to your handlebars with hook-and-loop attachment along with bars and frame. Features a large main compartment, separate dual-accessible phone compartment, lanyard, and easy-to-grab zipper pulls. Opens up completely for easy access. Loop MOLLE on the front to attach different items. Look around for some cool hook patches that can attach to the front of the bag. - 5 multi-positional straps for mounting - Straps are extra-long, cut to the desired length - Fits the largest phones with large cases - Phone is operable & audible while in the case - Made of 840 denier nylon & polyester - 11" x 5" x 4"
$20.00
Pocket Power Hit the road or trail carrying everything you need for basic repairs or adjustments in one handy, compact case. This tiny yet super functional kit includes T25 and T30 torx bits, 2.5, 3, 4, 5, and 6mm Allen bits and a flathead screwdriver. Individual T- or l-handle tools let you access tight places and give you more leverage on bolts and screws. - 8 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm and a flathead. - Pocket sized nylon carrying pouch includes a stash for your I.D., credit card and cash. - 0.30Lbs
$125.00
Blackburn's Outpost Handlebar Roll w/Dry Bag is made up of a versatile handlebar harness and waterproof stuff bag. It is perfect for overnight rides and can easily carry sleeping bags, tents, clothing— nearly anything you need. - Quick release mount — installs securely and releases quickly at your whim - Works with many standard dry bags and stuff sacks - 3.5kg/8lb capacity, not recommended for carbon handlebars - Daisy chain loop webbing provides extra opportunities to attach lights or other gear - Weight: 1.14lbs
$425.00
Lighter, Stronger, Faster The Vaypor G brings to Gravel riding Bont Cycling’s industry-leading carbon technology and biomechanical efficiency. Our latest flagship shoe sets new standards for those with a passion for dirt. - Model: Vaypor G - Material: Unidirectional carbon monocoque chassis with Durolite upper and faux suede leather liner - Stack Height: 3.6 mm - Air Vents: Frontal area and tongue air vents - Innersole: EVA thermo-moldable - Sole Guards: Replaceable - Padding: Memory Foam - Cleat Mounting: MM grid plus grip / SPD compatible - Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin - Closing Options: Dual dial retention system with Kevlar wiring
$3.99
Keep your computer and sensors ready for every ride with replacement batteries. Genuine replacement parts. - Don't let a dead battery spoil your ride. - Keep your computer fresh and ready to go with a new battery. - For use with the Bontrager Micro Remote - Sold individually
$7.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$7.99
The adapter puck is required for mounting Wahoo head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Wahoo head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement
$9.50 - $10.00
The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700cx 23 – 25 also fits 27 x 7/8 – 1 - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4
Page 1 of 39 Next page